02577nas a2200241 4500008003900000245009300039210006900132260004200201300001400243520183800257653001202095653001302107100001702120700001102137700001402148700001602162700001902178700001502197700002002212700001502232700002002247856006802267 2014 d00aManipulation Framework for Compliant Humanoid COMAN: Application to a Valve Turning Task0 aManipulation Framework for Compliant Humanoid COMAN Application  aMadrid, Spain, November 18 - 20bIEEE a664 - 6703 a

With the purpose of achieving a desired interaction performance for our compliant humanoid robot (COMAN), in this paper we propose a semi-autonomous control framework and evaluate it experimentally in a valve turning setup. The control structure consists of various modules and interfaces to identify the valve, locate the robot in front of it and perform the manipulation. The manipulation module implements four motion primitives (Reach, Grasp, Rotate and Disengage) and realizes the corresponding desired impedance profile for each phase to accomplish the task. In this direction, to establish a stable and compliant contact between the valve and the robot hands, while being able to generate the sufficient rotational torques depending on the valve's friction, Rotate incorporates a novel dual-arm impedance control technique to plan and realize a task-appropriate impedance profile. Results of the implementation of the proposed control framework are firstly evaluated in simulation studies using Gazebo. Subsequent experimental results highlight the efficiency of the proposed impedance planning and control in generation of the required interaction forces to accomplish the task.

10aHaptics10aRobotics1 aAjoudani, A.1 aLee, J1 aRocchi, A1 aFerrati, M.1 aHoffman, Mingo1 aSettimi, A1 aCaldwell, D. G.1 aBicchi, A.1 aTsagarakis, N G uhttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=704143402710nas a2200193 4500008003900000245011400039210007100153260004700224300001600271520205600287653001202343653001302355100001702368700002002385700001102405700001702416700001502433856006802448 2014 d00aNatural Redundancy Resolution in Dual-Arm Manipulation using Configuration Dependent Stiffness (CDS) Control0 aNatural Redundancy Resolution in DualArm Manipulation using Confi aHong Kong, May 31 2014-June 7 2014 bIEEE a1480 - 14863 a

Incorporation of human motor control principles in the motion control architectures for humanoid robots or assistive and prosthesis devices will permit these systems not only to look anthropomorphic and natural at the body ware level but also to generate natural motion profiles resembling those executed by humans during manipulation and locomotion. In this work, relying on the observations on human bimanual coordination, a novel realtime motion control strategy is proposed to regulate the desired Cartesian stiffness profile during the execution of bimanual tasks. The novelty of the proposed control scheme relies on the use of common mode stiffness (CMS) and configuration dependent stiffness (CDS) to regulate the size and directionality of the task space stiffness ellipsoid. Thanks to the CDS control, the proposed scheme is not only proved to be effective in regulating the desired stiffness ellipsoid but also permits to resolve the manipulator redundancy in a natural manner. The effectiveness of the controller is evaluated in an experimental setup in which two cooperating robotic arms are executing an assembly task. Experimental results demonstrate that the proposed dual-arm CDS-CMS controller is effective in tracking the desired stiffness ellipsoids as well as in producing human-like natural motions for the two robotic arms.

10aHaptics10aRobotics1 aAjoudani, A.1 aTsagarakis, N G1 aLee, J1 aGabiccini, M1 aBicchi, A. uhttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6945252