@article {4083, title = {Evaluation of a Simultaneous Myoelectric Control Strategy for a Multi-DoF Transradial Prosthesis}, year = {2020}, author = {C. Piazza and M. Rossi and M. G. Catalano and A. Bicchi and L. Hargrove} } @article {4085, title = {Exploring augmented grasping capabilities in a multi-synergistic soft bionic hand}, journal = {Journal of NeuroEngineering and Rehabilitation}, volume = {17}, year = {2020}, chapter = {116}, doi = {https://doi.org/10.1186/s12984-020-00741-y}, url = {https://jneuroengrehab.biomedcentral.com/articles/10.1186/s12984-020-00741-y$\#$article-info}, author = {C. Piazza and A. M. Simon and K. L. Turner and L. A. Miller and M. G. Catalano and A. Bicchi and L. Hargrove} } @inbook {4117, title = {Networked Systems Theory: Distributed Algorithms for Optimal Cooperation of Dynamical Systems}, booktitle = {Analytics for the Sharing Economy: Mathematics, Engineering and Business Perspectives}, year = {2020}, pages = {25{\textendash}37}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, address = {Cham}, abstract = {

Interconnection of a large number of systems has become a reality from a technological point of view although intelligent connection among smart systems still presents a challenge in several application scenarios. More specifically, when many smart devices must accomplish an overall goal based on information exchanges with other devices, several factors render this task a real challenge, such as, knowing what specific information to exchange, with whom, how to go about it, and when this exchange will occur. Moreover, interconnected devices may require access to or the use of common resources, making the management of the overall system even more complex. The management of shared resources usually sets the goal of optimizing usage while guaranteeing achievement of the overall goals. Algorithms or protocols that grant the device a correct, safe and optimized access to resources play a fundamental role. In this chapter we will provide those algorithms that are fundamental in several different application scenarios that allow for the development of more complex algorithms in order to manage interconnected systems in the management of shared resources.

}, isbn = {978-3-030-35032-1}, doi = {10.1007/978-3-030-35032-1_3}, url = {https://doi.org/10.1007/978-3-030-35032-1_3}, author = {L. Pallottino}, editor = {E. Crisostomi and B. Ghaddar and F. Hausler and J. Naoum-Sawaya and G. Russo and R. Shorten} } @conference {3746, title = {Preliminary Results Toward Continuous and Proportional Control of a Multi-synergistic Soft Prosthetic Hand}, booktitle = {International Conference on NeuroRehabilitation}, year = {2018}, doi = {https://doi.org/10.1007/978-3-030-01845-0_15}, author = {C. Piazza and M. G. Catalano and A. Bicchi and L. Hargrove} } @conference {3747, title = {The softpro project: Synergy-based open-source technologies for prosthetics and rehabilitation}, booktitle = {International Symposium on Wearable Robotics}, year = {2018}, doi = {https://doi.org/10.1007/978-3-030-01887-0_71}, author = {C. Piazza and M. G. Catalano and M. Bianchi and E. Ricciardi and D. Pratichizzo and S. Haddadin and Luft, A. R. L. and O. Lambercy and R. Gassert and E. Jakubowitz and H. Van Der Kooij and F. Tonis and F. Bonomo and B. de Jonge and T. Ward and K. Zhao and M. Santello and A. Bicchi} } @inbook {3381, title = {WALK-MAN Humanoid Platform}, booktitle = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, volume = {121}, number = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, year = {2018}, pages = {495{\textendash}548}, publisher = {Springer}, organization = {Springer}, doi = {10.1007/978-3-319-74666-1_13}, author = {N. G. Tsagarakis and F. Negrello and M. Garabini and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and M. G. Catalano and M. Ferrati and L. Muratore and P. Kryczka and E. Mingo Hoffman and A Settimi and A. Rocchi and A. Margan and S. Cordasco and D. Kanoulas and A. Cardellino and L. Natale and H. Dallali and J. Malzahn and N. Kashiri and V. Varricchio and L. Pallottino and C. Pavan and J. Lee and A. Ajoudani and D. G. Caldwell and A. Bicchi} } @article {2991, title = {On the adhesion-cohesion balance and oxygen consumption characteristics of liver organoids}, journal = {Plos One}, year = {2017}, month = {03/2017}, abstract = {

Liver organoids (LOs) are of interest in tissue replacement, hepatotoxicity and pathophysiological studies. However, it is still unclear what triggers LO self-assembly and what the optimal environment is for their culture. Hypothesizing that LO formation occurs as a result of a fine balance between cell-substrate adhesion and cell-cell cohesion, we used 3 cell types (hepatocytes, liver sinusoidal endothelial cells and mesenchymal stem cells) to investigate LO self-assembly on different substrates keeping the culture parameters (e.g. culture media, cell types/number) and substrate stiffness constant. As cellular spheroids may suffer from oxygen depletion in the core, we also sought to identify the optimal culture conditions for LOs in order to guarantee an adequate supply of oxygen during proliferation and differentiation. The oxygen consumption characteristics of LOs were measured using an O2 sensor and used to model the O2 concentration gradient in the organoids. We show that no LO formation occurs on highly adhesive hepatic extra-cellular matrix-based substrates, suggesting that cellular aggregation requires an optimal trade-off between the adhesiveness of a substrate and the cohesive forces between cells and that this balance is modulated by substrate mechanics. Thus, in addition to substrate stiffness, physicochemical properties, which are also critical for cell adhesion, play a role in LO self-assembly.

}, keywords = {Bioengineering}, doi = {http://dx.doi.org/10.1371/journal.pone.0173206}, url = {http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0173206}, author = {G. Mattei and C. Magliaro and S. Giusti and S. D. Ramachandran and S. Heinz and J. Braspenning and A. Ahluwalia} } @conference {3139, title = {Cerebellar-Inspired Learning Rule for Gain Adaptation of Feedback Controllers}, booktitle = {IEEE Mediterranean Conference on Control and Automation}, year = {2017}, publisher = {IEEE}, organization = {IEEE}, address = {3-6 July 2017 in Valletta, Malta}, abstract = {

The cerebellum is a crucial brain structure in enabling precise motor control in animals. Recent advances suggest that the timing of the plasticity rule of Purkinje cells, the main cells of the cerebellum, is matched to behavioral function.Simultaneously, counter-factual predictive control (CFPC), a cerebellar-based control scheme, has shown that the optimal rule for learning feed-forward action in an adaptive filter playing the role of the cerebellum must include a forward model of the system controlled. Here we show how the same learning rule obtained in CFPC, which we term as Model-enhanced least mean squares (ME-LMS), emerges in the problem of learning the gains of a feedback controller. To that end, we frame a model-reference adaptive control (MRAC) problem and derive an adaptive control scheme treating the gains of a feedback controller as if they were the weights of an adaptive linear unit. Our results demonstrate that the approach of controlling plasticity with a forward model of the subsystem controlled can provide a solution to a wide set of adaptive control problems

}, author = {I. Herreros and X. D. Arsiwalla and C. Della Santina and J.-Y. Puigbo and A. Bicchi and P. F. M. J. Verschure} } @article {3045, title = {Coordination Control of a Dual-arm Exoskeleton Robot Using Human Impedance Transfer Skills}, journal = {IEEE Trans. Systems Man and Cybernetics: Systems}, year = {2017}, month = {06/2017}, abstract = {

This paper has developed a coordination control method for a dual-arm exoskeleton robot based on human impedance transfer skills, where the left (master) robot arm extracts the human limb impedance stiffness and position profiles, and then transfers the information to the right (slave) arm of the exoskeleton. A computationally efficient model of the arm endpoint stiffness behavior is developed and a co-contraction index is defined using muscular activities of a dominant antagonistic muscle pair. A reference command consisting of the stiffness and position profiles of the operator is computed and realized by one robot in real-time. Considering the dynamics uncertainties of the robotic exoskeleton, an adaptive-robust impedance controller in task space is proposed to drive the slave arm tracking the desired trajectories with convergent errors. To verify the robustness of the developed approach, a study of combining adaptive control and human impedance transfer control under the presence of unknown interactive forces is conducted. The experimental results of this paper suggest that the proposed control method enables the subjects to execute a coordination control task on a dual-arm exoskeleton robot by transferring the stiffness from the human arm to the slave robot arm, which turns out to be effective.

}, keywords = {Robotics}, doi = {10.1109/TSMC.2017.2706694}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7944582}, author = {B. Huang and Z. Li and X. Wu and A. Ajoudani and A. Bicchi and J. Liu} } @article {3226, title = {Systematic Review of fMRI Compatible Devices: Design and Testing Criteria}, journal = {ANNALS OF BIOMEDICAL ENGINEERING}, year = {2017}, keywords = {Biomedical Engineering, Compatibility, fMRI, Mechatronic devices, Safety}, doi = {10.1007/s10439-017-1853-1}, url = {http://link.springer.com/journal/volumesAndIssues/10439}, author = {V. Hartwig and N. Carbonaro and A. Tognetti and N. Vanello} } @article {3137, title = {WALK-MAN: A High-Performance Humanoid Platform for Realistic Environments}, journal = {Journal of Field Robotics}, volume = {34}, year = {2017}, month = {06/2017}, pages = {1 - 34}, abstract = {

In this work, we present WALK-MAN, a humanoid platform that has been developed to operate in realistic unstructured environment, and demonstrate new skills including powerful manipulation, robust balanced locomotion, high-strength capabilities, and physical sturdiness. To enable these capabilities, WALK-MAN design and actuation are based on the most recent advancements of series elastic actuator drives with unique performance features that differentiate the robot from previous state-of-the-art compliant actuated robots. Physical interaction performance is benefited by both active and passive adaptation, thanks to WALK-MAN actuation that combines customized high-performance modules with tuned torque/velocity curves and transmission elasticity for high-speed adaptation response and motion reactions to disturbances. WALK-MAN design also includes innovative design optimization features that consider the selection of kinematic structure and the placement of the actuators with the body structure to maximize the robot performance. Physical robustness is ensured with the integration of elastic transmission, proprioceptive sensing, and control. The WALK-MAN hardware was designed and built in 11 months, and the prototype of the robot was ready four months before DARPA Robotics Challenge (DRC) Finals. The motion generation of WALK-MAN is based on the unified motion-generation framework of whole-body locomotion and manipulation (termed loco-manipulation). WALK-MAN is able to execute simple loco-manipulation behaviors synthesized by combining different primitives defining the behavior of the center of gravity, the motion of the hands, legs, and head, the body attitude and posture, and the constrained body parts such as joint limits and contacts. The motion-generation framework including the specific motion modules and software architecture is discussed in detail. A rich perception system allows the robot to perceive and generate 3D representations of the environment as well as detect contacts and sense physical interaction force and moments. The operator station that pilots use to control the robot provides a rich pilot interface with different control modes and a number of teleoperated or semiautonomous command features. The capability of the robot and the performance of the individual motion control and perception modules were validated during the DRC in which the robot was able to demonstrate exceptional physical resilience and execute some of the tasks during the competition.

}, keywords = {Robotics}, issn = {1556-4967}, doi = {10.1002/rob.21702}, url = {http://onlinelibrary.wiley.com/doi/10.1002/rob.21702/epdf}, author = {N. G. Tsagarakis and D. G. Caldwell and F. Negrello and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and L. Muratore and A. Margan and A. Cardellino and L. Natale and E. Mingo Hoffman and H. Dallali and N. Kashiri and J. Malzahn and J. Lee and P. Kryczka and D. Kanoulas and M. Garabini and M. G. Catalano and M. Ferrati and V. Varricchio and L. Pallottino and C. Pavan and A. Bicchi and A Settimi and A. Rocchi and A. Ajoudani} } @article {2685, title = {The Change in Fingertip Contact Area as a Novel Proprioceptive Cue}, journal = {Current Biology}, volume = {26}, year = {2016}, month = {05/2016}, pages = {1159{\textendash}1163}, abstract = {

Humans, many animals, and certain robotic hands have deformable fingertip pads. Deformable pads have the advantage of conforming to the objects that are being touched, ensuring a stable grasp for a large range of forces and shapes. Pad deformations change with finger displacements during touch. Pushing a finger against an external surface typically provokes an increase of the gross contact area, potentially providing a relative motion cue, a situation comparable to looming in vision. The rate of increase of the area of contact also depends on the compliance of the object. Because objects normally do not suddenly change compliance, participants may interpret an artificially induced variation in compliance, which coincides with a change in the gross contact area, as a change in finger displacement, and consequently they may misestimate their finger{\textquoteright}s position relative to the touched object. To test this, we asked participants to compare the perceived displacements of their finger while contacting an object varying pseudo-randomly in compliance from trial to trial. Results indicate a bias in the perception of finger displacement induced by the change in compliance, hence in contact area, indicating that participants interpreted the altered cutaneous input as a cue to proprioception. This situation highlights the capacity of the brain to take advantage of knowledge of the mechanical properties of the body and of the external environment.

}, keywords = {Haptics, Robotics}, doi = {10.1016/j.cub.2016.02.052}, url = {http://www.sciencedirect.com/science/article/pii/S0960982216301348}, author = {A. Moscatelli and M. Bianchi and A. Serio and A. Terekhov and V. Hayward and M. Ernst and A. Bicchi} } @inbook {2714, title = {A Full Body Sensing System for Monitoring Stroke Patients in a Home Environment}, booktitle = {Biomedical Engineering Systems and Technologies: 7th International Joint Conference, BIOSTEC 2014, Angers, France, March 3-6, 2014, Revised Selected Papers}, year = {2016}, pages = {378 - 393}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, keywords = {Bioengineering}, isbn = {978-3-319-26128-7}, doi = {10.1007/978-3-319-26129-4_25}, author = {Klaassen, B. and van Beijnum, B.J.F. and Weusthof, M. H. H. and D. Hofs and van Meulen, F.B. and E. Droog and H. Luinge and S. Laurens and A. Tognetti and F. Lorussi and R. Paradiso and Held, J. and Luft, A. R. L. and Reenalda, J. and Nikamp, C. D. M. and Buurke, J. H. and Hermens, HJ and Veltink, P.} } @article {2866, title = {A Multi-Modal Sensing Glove for Human Manual-Interaction Studies}, journal = {Electronics}, volume = { 5}, year = {2016}, note = {

This work is supported in part by the European Research Council under the Advanced Grant {\textquotedblleft}SoftHands: A Theory of Soft Synergies for a New Generation of Artificial Hands{\textquotedblright} (No. ERC-291166), by the EU H2020 projects {\textquotedblleft}SoftPro: Synergy-based Open-source Foundations and Technologies for Prosthetics and RehabilitatiOn{\textquotedblright} (No. 688857) and {\textquotedblleft}SOMA: Soft Manipulation{\textquotedblright} (No. 64559) and by the EU FP7 project (No. 601165) {\textquotedblleft}WEARable HAPtics for Humans and Robots (WEARHAP){\textquotedblright}.

}, abstract = {

We present an integrated sensing glove that combines two of the most visionary wearable sensing technologies to provide both hand posture sensing and tactile pressure sensing in a unique, lightweight, and stretchable device. Namely, hand posture reconstruction employs Knitted Piezoresistive Fabrics that allows us to measure bending. From only five of these sensors (one for each finger) the full hand pose of a 19 degrees of freedom (DOF) hand model is reconstructed leveraging optimal sensor placement and estimation techniques. To this end, we exploit a-priori information of synergistic coordination patterns in grasping tasks. Tactile sensing employs a piezoresistive fabric allowing us to measure normal forces in more than 50 taxels spread over the palmar surface of the glove. We describe both sensing technologies, report on the software integration of both modalities, and describe a preliminary evaluation experiment analyzing hand postures and force patterns during grasping. Results of the reconstruction are promising and encourage us to push further our approach with potential applications in neuroscience, virtual reality, robotics and tele-operation.

}, keywords = {Haptics}, doi = {10.3390/electronics5030042}, url = {http://www.mdpi.com/2079-9292/5/3/42/pdf}, author = {M. Bianchi and R. Haschke and G. B{\"u}scher and S. Ciotti and N. Carbonaro and A. Tognetti} } @article {2627, title = {No More Heavy Lifting: Robotic Solutions to the Container Unloading Problem}, journal = {IEEE Robotics and Automation Magazine}, volume = {23}, year = {2016}, month = {08/2016}, chapter = {94}, keywords = {Robotics}, doi = {https://doi.org/10.1109/MRA.2016.2535098}, url = {https://ieeexplore.ieee.org/document/7553531}, author = {T. Stoyanov and N. Vaskeviciusz and C. A. Mueller and T. Fromm and R. Krug and V. Tincani and R. Mojtahedzadeh and S. Kunaschk and R. M. Ernits and D. R. Canelhas and M. Bonilla and S. Schwertfeger and M. Bonini and H. Halfar and K. Pathak and M. Rohde and G Fantoni and A. Bicchi and A. Birk and A. Lilienthal and W. Echelmeyer} } @conference {2655, title = {Reflex Control of the Pisa/IIT SoftHand during Object Slippage}, booktitle = {IEEE International Conference of Robotics and Automation (ICRA2016)}, year = {2016}, pages = {1972 - 1979}, publisher = {IEEE}, organization = {IEEE}, address = {Stockholm, Sweden}, abstract = {

In this work, to guarantee the Pisa/IIT SoftHand{\textquoteright}s

grasp robustness against slippage, three reflex control modes,

namely Current, Pose and Impedance, are implemented and

experimentally evaluated. Towards this objective, ThimbleSense

fingertip sensors are designed and integrated into the thumb

and middle fingers of the SoftHand for real-time detection and

control of the slippage. Current reflex regulates the restoring

grasp forces of the hand by modulating the motor{\textquoteright}s current

profile according to an update law. Pose and Impedance reflex

modes instead replicate this behaviour by implementing an

impedance control scheme. The difference between the two

latter is that the stiffness gain in Impedance reflex mode is

being varied in addition to the hand pose, as a function of

the slippage on the fingertips. Experimental setup also includes

a seven degrees-of-freedom robotic arm to realize consistent

trajectories (e.g. lifting) among three control modes for the sake

of comparison. Different test objects are considered to evaluate

the efficacy of the proposed reflex modes in our experimental

setup. Results suggest that task-appropriate restoring forces

can be achieved using Impedance reflex due to its capability

in demonstrating instantaneous and rather smooth reflexive

behaviour during slippage. Preliminary experiments on five

healthy human subjects provide evidence on the similarity of the

control concepts exploited by the humans and the one realized

by the Impedance reflex, highlighting its potential in prosthetic

applications.

}, keywords = {Haptics, Robotics}, doi = {10.1109/ICRA.2016.7487344}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7487344}, author = {A. Ajoudani and E. Hocaoglu and Altobelli, A and M. Rossi and E. Battaglia and N G Tsagarakis and A. Bicchi} } @article {2660, title = {A synergy-based hand control is encoded in human motor cortical areas}, journal = {eLIFE}, year = {2016}, abstract = {

How the human brain controls hand movements to carry out different tasks is still debated. The concept of\ synergy\ has been proposed to indicate functional modules that may simplify the control of hand postures by simultaneously recruiting sets of muscles and joints. However, whether and to what extent synergic hand postures are encoded as such at a cortical level remains unknown. Here, we combined kinematic, electromyography, and brain activity measures obtained by functional magnetic resonance imaging while subjects performed a variety of movements towards virtual objects. Hand postural information, encoded through kinematic synergies, were represented in cortical areas devoted to hand motor control and successfully discriminated individual grasping movements, significantly outperforming alternative somatotopic or muscle-based models. Importantly, hand postural synergies were predicted by neural activation patterns within primary motor cortex. These findings support a novel cortical organization for hand movement control and open potential applications for brain-computer interfaces and neuroprostheses.

}, doi = {http://dx.doi.org/10.7554/eLife.13420}, url = {http://elifesciences.org/content/5/e13420v2}, author = {A. Leo and G. Handjaras and M. Bianchi and H. Marino and M Gabiccini and Guidi, A. and E. P. Scilingo and P. Pietrini and A. Bicchi and M. Santello and E. Ricciardi} } @article {2904, title = {Variable Stiffness Actuators: Review on Design and Components}, journal = { IEEE/ASME Transactions on Mechatronics }, volume = {21}, year = {2016}, month = {10/2016}, pages = {2418 - 2430}, abstract = {

Variable stiffness actuators (VSAs) are complex mechatronic devices that are developed to build passively compliant, robust, and dexterous robots. Numerous different hardware designs have been developed in the past two decades to address various demands on their functionality. This review paper gives a guide to the design process from the analysis of the desired tasks identifying the relevant attributes and their influence on the selection of different components such as motors, sensors, and springs. The influence on the performance of different principles to generate the passive compliance and the variation of the stiffness are investigated. Furthermore, the design contradictions during the engineering process are explained in order to find the best suiting solution for the given purpose. With this in mind, the topics of output power, potential energy capacity, stiffness range, efficiency, and accuracy are discussed. Finally, the dependencies of control, models, sensor setup, and sensor quality are addressed.

}, keywords = {Robotics}, doi = {10.1109/TMECH.2015.2501019}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7330025}, author = {S. Wolf and G. Grioli and O. Eiberger and W. Friedl and M. Grebenstein and H. Hoppner and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and D. Lefeber and S. Stramigioli and N. G. Tsagarakis and M. Van Damme and R. Van Ham and B. Vanderborght and L. C. Visser and A. Bicchi and A Albu-Schaeffer} } @conference {2278, title = {Autonomous bioreactor modules for disease models and detection of systemic toxicity}, booktitle = {ALTEX Proceedings}, year = {2014}, pages = {43}, address = {Prague, Czech Republic}, abstract = {

Advanced systems based on bioreactors and scaffolds are an essential step towards the development of more predictive and ethical alternatives to animal experiments. Size, modularity, automation, monitoring and essential design are crucial because these elements will ease the transition from old technology and accelerate their acceptance into mainstream research. Based on these requirements, the interconnected transparent sensorised {\^a}{\texteuro}{\oe}lego{\^a}{\texteuro} bioreactors designed in our labs have been used to generate physiologically relevant disease and toxicity models which recapitulate systemic responses impossible to observe in standard cell cultures. The disease model is an interconnected bioreactor circuit with i) adipose tissue in 3D in 3 different concentrations representing normo-weight, over weight and obese body mass indices, ii) human hepatocytes on porous collagen scaffolds and iii) monolayers of human endothelial cells. High adiposity and elevated glucose levels induce systemic and endothelial inflammation in the circuit, as observed in overweight and diabetic humans (Iori et al., 2012). Using similar technology a three-tissue circuit for monitoring the absorption, distribution, metabolism and toxicity of nanoparticles was developed in the context of the EU project InLiveTox (Ucciferri et al., 2014). The results were strikingly similar to those observed in animal experiments demonstrating that the dynamic 3D in-vitro models are ethical, meaningful and economically viable replacements.

}, keywords = {Bioengineering}, author = {A. Ahluwalia and S. Giusti and Sbrana, T. and M. Wilkinson and A. Misto and Lehr, C.-M. and M. Liley}, editor = {S. Horst and D. J{\'\i}rov{\'a}} } @article {1445, title = {Biomechanisch sichere Geschwindigkeitsregelung fur die Mensch-Roboter Interaktion}, journal = {At-Automatisierungstechnik }, volume = {62}, year = {2014}, pages = {175 - 187}, keywords = {Robotics}, issn = {0178-2312}, author = {S. Haddadin and S. Haddadin and A. Khoury and T. Rokahr and S. Parusel and R. Burgkart and A. Bicchi and A Albu-Schaeffer} } @conference {2086, title = {A change in the fingertip contact area induces an illusory displacement of the finger}, booktitle = {Eurohaptics}, volume = {LNCS - Free Preview Haptics: Neuroscience, Devices, Modeling, and Applications}, year = {2014}, pages = {72 - 79}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, address = {Versailles, France), June 2014}, keywords = {Haptics, Robotics}, doi = {10.1007/978-3-662-44196-1_10}, author = {A. Moscatelli and M. Bianchi and A. Serio and Al Atassi, O. and S. Fani and A. Terekhov and V. Hayward and M. Ernst and A. Bicchi} } @conference {2215, title = {Daily-life tele-monitoring of motor performance in stroke survivors}, booktitle = {Proceedings of XIII International Symposium on 3D Analysis of Human Movement}, year = {2014}, month = {17 July 2014}, pages = {159{\textendash}162}, abstract = {

The objective of the EU project INTERACTION is to develop an unobtrusive and modular sensing system for objective monitoring of daily-life motor performance of stroke survivors. This will enable clinical professionals to advise their patients about their continued daily-life activity profile and home training, and evaluate and optimize rehabilitation programs.A modular textile-integrated sensing system was developed and performance and capacity measures were proposed and clinically tested in stroke subject.Telemonitoring facilities were developed and tested. In the last stage of the project, the system will be tested during daily-life.

}, author = {Veltink, P.H. and van Meulen, F.B. and van Beijnum, B.J.F. and Klaassen, B. and Hermens, H. J. and Droog, E. and Weusthof, M. H. H. and F. Lorussi and A. Tognetti and Reenalda, J. and Nikamp, C. D. M. and Baten, C. T. M. and Buurke, J. H. and Held, J. and Luft, A. R. L. and Luinge, H. and De Toma, G. and Mancuso, C. and Paradiso, R.} } @article {2178, title = {Grasping devices and methods in automated production processes }, journal = {CIRP Annals - Manufacturing Technology}, volume = {63}, year = {2014}, pages = {679-701}, abstract = {

In automated production processes grasping devices and methods play a crucial role in the handling of many parts, components and products. This keynote paper starts with a classification of grasping phases, describes how different principles are adopted at different scales in different applications and continues explaining different releasing strategies and principles. Then the paper classifies the numerous sensors used to monitor the effectiveness of grasping (part presence, exchanged force, stick-slip transitions, etc.). Later the grasping and releasing problems in different fields (from mechanical assembly to disassembly, from aerospace to food industry, from textile to logistics) are discussed. Finally, the most recent research is reviewed in order to introduce the new trends in grasping. They provide an outlook on the future of both grippers and robotic hands in automated production processes.

}, keywords = {Robotics}, doi = {10.1016/j.cirp.2014.05.006}, url = {http://www.sciencedirect.com/science/article/pii/S0007850614001887}, author = {G Fantoni and Santochi, M. and Dini, G. and Tracht, K. and Scholz-Reiter, B. and Fleischer, J. and Kristoffer Lien, T. and Seliger, G. and Reinhart, G. and Franke, J. and N{\o}rgaard Hansen, H. and Verl, A.} } @article {2247, title = {Instantaneous monitoring of heart beat dynamics during anesthesia and sedation}, journal = {Journal of Computational Surgery}, volume = {3}, year = {2014}, author = {G. Valenza and O. Akeju and K. J. Pavone and L. Citi and K. E. Hartnack and A. Sampson and Purdon, P.L. and Brown, E.N. and R. Barbieri} } @conference {2159, title = {Manipulation Framework for Compliant Humanoid COMAN: Application to a Valve Turning Task}, booktitle = {IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014)}, year = {2014}, pages = {664 - 670}, publisher = {IEEE}, organization = {IEEE}, address = {Madrid, Spain, November 18 - 20}, abstract = {

With the purpose of achieving a desired interaction performance for our compliant humanoid robot (COMAN), in this paper we propose a semi-autonomous control framework and evaluate it experimentally in a valve turning setup. The control structure consists of various modules and interfaces to identify the valve, locate the robot in front of it and perform the manipulation. The manipulation module implements four motion primitives (Reach, Grasp, Rotate and Disengage) and realizes the corresponding desired impedance profile for each phase to accomplish the task. In this direction, to establish a stable and compliant contact between the valve and the robot hands, while being able to generate the sufficient rotational torques depending on the valve{\textquoteright}s friction, Rotate incorporates a novel dual-arm impedance control technique to plan and realize a task-appropriate impedance profile. Results of the implementation of the proposed control framework are firstly evaluated in simulation studies using Gazebo. Subsequent experimental results highlight the efficiency of the proposed impedance planning and control in generation of the required interaction forces to accomplish the task.

}, keywords = {Haptics, Robotics}, doi = {10.1109/HUMANOIDS.2014.7041434}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7041434}, author = {A. Ajoudani and J. Lee and A. Rocchi and M. Ferrati and E. Mingo Hoffman and A Settimi and D. G. Caldwell and A. Bicchi and N G Tsagarakis} } @conference {2279, title = {The need of innovative technologies for new 3D relevant in-vitro models and the answer of Ivtech}, booktitle = {ALTEX Proceedings}, year = {2014}, pages = {45{\textendash}6}, address = {Prague, Czech Republic}, abstract = {

New relevant in-vitro models are priorities in pharmaco-toxicology, cosmetic and food research to reduce the animal tests. Therefore, invivo models show ethical issues, are not time and cost effective and are progressively showing scientific limitations: for instance they fail in detection of pathogens that are species specific (Mazzoleni et al., 2009). The search of more relevant pre-clinical models forced the researcher to move from 2D to 3D in-vitro models in order to maintain the phenotype of cells (Lovit et al., 2013; Mattei et al., 2014). Even if the significant progress in material science, the metabolic requirement of 3D tissues is higher than a 2D culture and the scaffold is a limitation in nutrients transport. Dynamic cell culture chambers are then required to assure the gas/nutrient supply, waste elimination, mechanical stimulation of cells, study of cross talk between different tissues and real time monitoring of cells. Nowadays the only systems that meet all these specifications are the Ivtech technologies. Ivtech is an innovative Italian start-up that grows up to solve the needs of in-vitro experts, offering and customizing several type of transparent, dynamic and modular cell culture systems, organizing workshops and training. The goal is to expand the 3D approach and permits a significant evolution towards highly relevant in-vitro models.

}, keywords = {Bioengineering}, author = {Sbrana, T. and G. Mattei and S. Giusti and A. Ahluwalia}, editor = {J. Dagmar and S. Horst} } @article {2153, title = {Peripheral Machine Interfaces: going beyond traditional surface electromyography}, journal = {Frontiers in Neurorobotics}, volume = {8}, year = {2014}, month = {08/2014}, pages = {1 - 17}, keywords = {Robotics}, doi = {10.3389/fnbot.2014.00022}, author = {C. Castellini and P. Artemiadis and M. Wininger and A. Ajoudani and M. Alimusaj and A. Bicchi and B. Caputo and W. Craelius and S. Dosen and K. Englehart and D. Farina and A. Gijsberts and S. B. Godfrey and L. Hargrove and M. Ison and T. Kuiken and M. Markovic and P. M. Pilarski and R. Rupp and E. Scheme} } @article {2234, title = {Special Issue on the Mechanics and Design of Robotic Hands}, year = {2014}, keywords = {Haptics, Robotics}, author = {Dollar, A. and A. Bicchi and M. Cutkosky and Howe, D.} } @conference {2160, title = {Upper-body Impedance Control with an Intuitive Stiffness Emulation for a Door Opening Task}, booktitle = {IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014)}, year = {2014}, pages = {713 - 719}, publisher = {IEEE}, organization = {IEEE}, address = {Madrid, Spain, November 18 - 20}, abstract = {

The advent of humanoids has brought new challenges in the real-world application. As a part of ongoing efforts to foster functionality of the robot accommodating a real environment, this paper introduces a recent progress on a door opening task with our compliant humanoid, CoMan. We presents a task-prioritized impedance control framework for an upper body system that includes a dual-arm, a waist, two soft hands, and 3D camera. Aimed to create desired responses to open the door, a novel stiffness modulation method is proposed, incorporating a realtime optimization. As a preliminary experiment, a full door-opening scenario (approaching to the door and reaching, grasping, rotating and pulling the door handle) is demonstrated under a semi-autonomous operation with a pilot. The experimental result shows the effectiveness and efficacy of the proposed impedance control approach. Despite of uncertainties from sensory data, the door opening task is successfully achieved and safe and robust interaction is established without creating excessive forces.

}, keywords = {Robotics}, doi = {10.1109/HUMANOIDS.2014.7041441}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7041441}, author = {J. Lee and A. Ajoudani and E. Mingo Hoffman and A. Rocchi and A Settimi and M. Ferrati and A. Bicchi and N G Tsagarakis and D. G. Caldwell} } @article {2258, title = {Computational Analysis of a Radiofrequency Knee Coil for Low-Field MRI Using FDTD}, journal = {APPLIED MAGNETIC RESONANCE}, volume = {44}, year = {2013}, pages = {389-400}, doi = {10.1007/s00723-012-0388-8}, author = {V. Hartwig and Tassano, S. and Mattii, A. and N. Vanello and V. Positano and M. F. Santarelli and L. Landini and G. Giovannetti} } @article {2256, title = {Design of a quadrature surface coil for hyperpolarized 13C MRS cardiac metabolism studies in pigs}, journal = {CONCEPTS IN MAGNETIC RESONANCE PART B-MAGNETIC RESONANCE ENGINEERING}, volume = {43b}, year = {2013}, pages = {69 - 77}, doi = {10.1002/cmr.b.21235}, author = {G. Giovannetti and Frijia, F. and V. Hartwig and Attanasio, S. and Menichetti, L. and N. Vanello and V. Positano and Ardenkjaer-Larsen, J. H. and Lionetti, V. and Aquaro, G. D. and De Marchi, D. and Schulte, R. and Wiesinger, F. and L. Landini and Lombardi, M. and M. F. Santarelli} } @article {2250, title = {FDTD Analysis of a Radiofrequency Knee Coil for Low-Field MRI: Sample-Induced Resistance and Decoupling Evaluation }, journal = {APPLIED MAGNETIC RESONANCE}, volume = {44}, year = {2013}, pages = {1393 - 1403}, doi = {10.1007/s00723-013-0488-0}, author = {Morelli, M. S. and V. Hartwig and Tassano, S. and N. Vanello and V. Positano and M. F. Santarelli and Carrozzi, A. and L. Landini and G. Giovannetti} } @article {2251, title = {Magnetic resonance butterfly coils: Design and application for hyperpolarized C-13 studies}, journal = {MEASUREMENT }, volume = {46}, year = {2013}, pages = {3282-3290}, doi = {10.1016/j.measurement.2013.06.031}, author = {G. Giovannetti and Frijia, F. and Attanasio, S. and Menichetti, L. and V. Hartwig and N. Vanello and Ardenkjaer-Larsen, J. H. and De Marchi, D. and V. Positano and Schulte, R. and L. Landini and Lombardi, M. and M. F. Santarelli} } @article {2259, title = {Modified cine inversion recovery pulse sequence for the quantification of myocardial T1 and gadolinium partition coefficient}, journal = {JOURNAL OF MAGNETIC RESONANCE IMAGING}, volume = {37}, year = {2013}, pages = {109-118}, doi = {10.1002/jmri.23807}, author = {Milanesi, M. and Barison, A. and Positano, V. and Masci, P. G. and De Marchi, D. and Marinelli, L. and Hardy, C. J. and Foo, T. K. and L. Landini and Lombardi, M.} } @article {2252, title = {Transmit-Only/Receive-Only Radiofrequency System for Hyperpolarized C-13 MRS Cardiac Metabolism Studies in Pigs}, journal = {APPLIED MAGNETIC RESONANCE}, volume = {44}, year = {2013}, pages = {1125-1138}, doi = {10.1007/s00723-013-0477-3}, author = {G. Giovannetti and Frijia, F. and V. Hartwig and Menichetti, L. and V. Positano and Ardenkjaer-Larsen, J. H. and Lionetti, V. and Aquaro, G. D. and De Marchi, D. and Schulte, R. and Wiesinger, F. and L. Landini and Lombardi, M. and M. F. Santarelli} } @article {1698, title = {Variable Impedance Actuators: a Review}, journal = {Robotics and Autonomous Systems}, volume = {61}, year = {2013}, note = {

Available online 6 August 2013

}, month = {12/2013}, pages = {1601{\textendash}1614}, abstract = {

Variable Impedance Actuators (VIA) have received increasing attention in recent years as many novel applications involving interactions with an unknown and dynamic environment including humans require actuators with dynamics that are not well-achieved by classical stiff actuators. This paper presents an overview of the different VIAs developed and proposes a classification based on the principles through which the variable stiffness and damping are achieved. The main classes are active impedance by control, inherent compliance and damping actuators, inertial actuators, and combinations of them, which are then further divided into subclasses. This classification allows for designers of new devices to orientate and take inspiration and users of VIA{\textquoteright}s to be guided in the design and implementation process for their targeted application.

}, keywords = {Robotics, Soft robotics, Variable Impedance Actuators}, url = {http://www.sciencedirect.com/science/article/pii/S0921889013001188}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and O. Eiberger and W. Friedl and G. Ganesh and M. Garabini and M. Grebenstein and G. Grioli and S. Haddadin and H. Hoppner and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @inbook {1237, title = {Artificially Rendered Cutaneous Cues for a New Generation of Haptic Displays}, booktitle = {Springer Series on Touch and Haptic Systems - part 2}, volume = {Immersive Multimodal Interactive Presence}, year = {2012}, pages = {171 - 188}, publisher = {Springer}, organization = {Springer}, keywords = {Robotics}, doi = {10.1007/978-1-4471-2754-3_10}, author = {E. P. Scilingo and M. Bianchi and N. Vanello and V. Hartwig and L. Landini and A. Bicchi} } @conference {1265, title = {HEFES: an Hybrid Engine for Facial Expressions Synthesis to control human-like androids and avatars}, booktitle = {BIOROB2012}, year = {2012}, pages = {195 - 200}, address = {Rome, Italy}, keywords = {Bioengineering}, author = {D. Mazzei and Lazzeri, N. and Hanson, D. and D. De Rossi} } @inbook {2002, title = {Immersive Multimodal Interactive Presence}, booktitle = {Immersive Multimodal Interactive Presence}, year = {2012}, pages = {215{\textendash}228}, publisher = {SPRINGER-VERLAG}, organization = {SPRINGER-VERLAG}, chapter = {FMRI Compatible Sensing Glove for Hand Gesture Monitoring}, address = {LONDON {\textendash} GBR}, isbn = {9781447127536}, doi = {10.1007/978-1-4471-2754-3_12}, url = {http://dx.medra.org/10.1007/978-1-4471-2754-3_12}, author = {N. Vanello and V. Hartwig and E. P. Scilingo and D. Bonino and E. Ricciardi and A. Tognetti and P. Pietrini and D. De Rossi and L. Landini and A. Bicchi} } @conference {2003, title = {INTERACTION, Training and monitoring of daily-life physical interaction with the environment after stroke}, booktitle = {Proceedings of XII International Symposium on 3D Analysis of Human Movement}, year = {2012}, pages = {{\textendash}}, author = {Veltink, PH and van Meulen, FB and van Beijnum, BJF and Hermens, HJ and D. De Rossi and F. Lorussi and A. Tognetti and Buurke, JH and Reenalda, J and Baten, CTM and Simons, CDM and Luft, AR L and Schepers, HM and Luinge, HJ and R. Paradiso and Orselli, R} } @article {1233, title = {On Making Robots Understand Safety: Embedding Injury Knowledge into Control}, journal = {International Journal of Robotics Research}, volume = {31}, year = {2012}, pages = {1578-1602}, keywords = {Robotics}, doi = {10.1177/0278364912462256 }, author = {S. Haddadin and S. Haddadin and A. Khoury and T. Rokahr and S. Parusel and R. Burgkart and A. Bicchi and A Albu-Schaeffer} } @conference {1264, title = {Realistic Humanlike Robots for Treatment of ASD, Social Training, and Research; Shown to Appeal to Youths with ASD, Cause Physiological Arousal, and Increase Human-to-Human Social Engagement}, booktitle = {Realistic Humanlike Robots for Treatment of Autism, PETRA 2012}, year = {2012}, pages = {1-7}, keywords = {Bioengineering}, author = {Hanson, D. and D. Mazzei and Garver, C. and D. De Rossi and Stevenson, M.} } @conference {1242, title = {A truly safely moving robot has to know what injury it may cause}, booktitle = {International Conference of Intelligent Robots and Systems - IROS 2012}, year = {2012}, month = {October 7 - 12}, pages = {5406-5413}, address = {Vilamoura, Algarve, Portugal}, keywords = {Robotics}, author = {S. Haddadin and S. Haddadin and A. Khoury and T. Rokahr and S. Parusel and R. Burgkart and A. Bicchi and A Albu-Schaeffer} } @article {1245, title = {Variable Impedance Actuators: Moving the Robots of Tomorrow}, year = {2012}, keywords = {Robotics}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and G. Ganesh and M. Garabini and G. Grioli and S. Haddadin and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @conference {SPHB11, title = {From Optimal Planning to Visual Servoing with Limited FOV}, booktitle = {2011 IEEE/RSJ International Conference on Intelligent RObots and Systems}, year = {2011}, month = {September 25 - 3}, pages = {2817-2824}, address = {S. Francisco, USA}, keywords = {Embedded Control, Robotics}, author = {P Salaris and L. Pallottino and S. Hutchinson and A. Bicchi} } @inbook {1789, title = {{Inherently Bio-Active Scaffolds: Intelligent Constructs to Model the Stem Cell Niche}}, booktitle = {Myocardial Tissue Engineering}, series = {Studies in Mechanobiology, Tissue Engineering and Biomaterials}, volume = {6}, year = {2011}, pages = {29{\textendash}47}, publisher = {Springer Berlin Heidelberg}, organization = {Springer Berlin Heidelberg}, address = {Berlin, Heidelberg}, abstract = {

The oft-abused phrase {\^a}{\texteuro}{\oe}genes load the gun, environment pulls the trigger{\^a}{\texteuro} can be applied to stem cells and stem cell niches as well as to cell{\^a}{\texteuro}{\textquotedblleft}material interfaces. Much is known about cell{\^a}{\texteuro}{\textquotedblleft}material interaction in general, perhaps a little less about how these interactions condition cell phenotype. With the increasing interest in stem cells and, in particular, their applications in tissue regeneration, the regulation of the stem cell microenvironment through modulation of intuitive or smart materials and structures, or what we term IBAS (Inherently Bio-Active Scaffolds) is poised to become a major field of research. Here, we discuss how cardiac regeneration strategies have undergone a gradual shift from the emphasis on biochemical signals and basic biology to one in which the material or scaffold plays a major role in establishing an equilibrium state. From being a constant battle or tug-of-war between the cells and synthetic environments, we conceive IBAS as intuitively responding to the cell{\^a}{\texteuro}{\texttrademark}s requirements to instate a sort of equilibrium in the system.

}, keywords = {Bioengineering}, isbn = {978-3-642-18055-2}, doi = {10.1007/978-3-642-18056-9}, url = {http://www.springerlink.com/content/j3k541l113233424/}, author = {P. Di Nardo and M. Minieri and Tirella, A and G. Forte and A. Ahluwalia}, editor = {Boccaccini, A. R. and Harding, S. E.} } @conference {2021, title = {A MR Compatible Sensing Glove for Brain Studies}, booktitle = {Proceedings of the 16th Annual Meeting of the Organization for Human Brain Mapping}, year = {2010}, month = {6-10 Giugno}, pages = {1262 MT{\textendash}PM{\textendash}}, author = {N. Vanello and V. Hartwig and M. Tesconi and E. Ricciardi and G. Zupone and A. Tognetti and D. Bonino and E. P. Scilingo and F. Cutolo and G. Giovannetti and P. Pietrini and D. De Rossi and L. Landini} } @conference {2022, title = {Neural Correlates of Human-Robot Handshaking}, booktitle = {Proc. of the 19th IEEE International Symposium in Robot and Human Interactive Communication}, year = {2010}, note = {

http://www.scopus.com/inward/record.url?eid=2-s2.0-78649822141\&partnerID=40\&md5=e485b7dd908e69afd535dc7792a8e5b3

}, month = {13-15, Settembre}, pages = {555{\textendash}561}, publisher = {IEEE}, organization = {IEEE}, address = {NEW YORK {\textendash} USA}, doi = {10.1109/ROMAN.2010.5598624}, url = {http://dx.medra.org/10.1109/ROMAN.2010.5598624}, author = {N. Vanello and D. Bonino and E. Ricciardi and M. Tesconi and E. P. Scilingo and V. Hartwig and A. Tognetti and G. Zupone and F. Cutolo and G. Giovannetti and P. Pietrini and D. De Rossi and L. Landini} } @inbook {FSBB10, title = {Visual Servoing via Advanced Numerical Methods}, volume = {401}, year = {2010}, pages = {335 - 360}, publisher = {Springer}, organization = {Springer}, chapter = {Unicycle{\textendash}like Robots with Eye-In-Hand Monocular Cameras: from PBVS Towards IBVS}, keywords = {Robotics}, author = {D. Fontanelli and P Salaris and F. A. W. Belo and A. Bicchi}, editor = {Graziano Chesi and Koichi Hashimoto} } @conference {MED08-HTB, title = {Neural network based robust adaptive control for a variable stiffness actuator}, booktitle = {Control and Automation, 16 th Mediterranean Conference on Control and Automation}, year = {2008}, pages = {1028 - 1034}, abstract = {

In this paper we present a robust adaptive controller based on a neural network (NN) for a variable stiffness actuator (VSA). The controller is able to independently set the mechanical stiffness and position at the joint shaft to guarantee robustness with respect to slowly time-varying and unmodeled friction coefficients affecting the dynamics of the actuator. The lumped uncertainties of the VSA including unmodeled dynamics are considered and approximated by a simple NN so that the controlled system is asymptotically stable, and remains effective while process conditions vary. To cope with the reconstruction error of the NN, a sliding mode like additional robust control term is introduced. The proofs for the uniformly ultimately bounded (UUB) and uniform asymptotic (UAS) stabilities for the closed-loop system are provided in detail via Lyapunov theory. Simulation and experimental results are reported in support of both validity and performance of the proposed approach.

}, keywords = {Embedded Control, Robotics}, author = {S. Huh and G. Tonietti and A. Bicchi} } @article {VHTRTZGCSSGPSBPDRL08, title = {Sensing Glove for Brain Studies: Design and assessment of its Compatibility for fMRI with a Robust Test}, journal = {IEEE - ASME Transactions on Mechatronics}, volume = {13}, number = {3}, year = {2008}, pages = {345-354}, abstract = {

In this paper, we describe a biomimetic-fabric-based sensing glove that can be used tomonitor hand posture and gesture. Our device is made of a distributed sensor network of piezoresistive conductive elastomers integrated into an elastic fabric. This solution does not affect natural movement and hand gestures, and can be worn for a long time with no discomfort. The glove could be fruitfully employed in behavioral and functional studies with functional MRI (fMRI) during specific tactile or motor tasks. To assess MR compatibility of the system, a statistical test on phantoms is introduced. This test can also be used for testing the compatibility of mechatronic devices designed to produce different stimuli inside the MR environment. We propose a statistical test to evaluate changes in SNR and time-domain standard deviations between image sequences acquired under different experimental conditions. fMRI experiments on subjects wearing the glove are reported. The reproducibility of fMRIresults obtained with andwithout the glove was estimated. A good similarity between the activated regions was found in the two conditions.

}, keywords = {Haptics, Robotics}, author = {N. Vanello and V. Hartwig and M. Tesconi and E. Ricciardi and A. Tognetti and G. Zupone and R. Gassert and D. Chapuis and N. Sgambelluri and E. P. Scilingo and G. Giovannetti and V. Positano and M. F. Santarelli and A. Bicchi and P. Pietrini and D. De Rossi and L. Landini} } @article {1628, title = {Surface modification of a synthetic polyurethane by plasma glow discharge: preparation and characterisation of bioactive monolayers}, journal = {REACTIVE \& FUNCTIONAL POLYMERS}, volume = {68}, year = {2008}, pages = {809{\textendash}821}, keywords = {Bioengineering}, issn = {1381-5148}, author = {Sartori, S and Rechichi, A and G. Vozzi and D{\textquoteright}Acunto, M and HEINE, E and P. Giusti and G. Ciardelli} } @article {arz+07ejc, title = {A component-based approach to the design of networked control systems}, journal = {European Journal of Control}, volume = {13}, number = {2{\textendash}3}, year = {2007}, note = {

Invited paper

}, pages = {261-279}, abstract = {

Component-based techniques revolve around composable, reusable software objects that shield the application level software from the details of the hardware and lowlevel software implementation and vice versa. Components provide many benefits that have led to their wide adoption in software and middleware developed for embedded systems: They are well-defined entities that can be replaced without affecting the rest of the systems, they can be developed and tested separately and integrated later, and they are reusable. Clearly such features are important for the design of large-scale complex systems more generally, beyond software architectures. We propose the use of a component approach to address embedded control problems. We outline a general componentbased framework to embedded control and show how it can be instantiated in specific problems that arise in the control over/of sensor networks. Building on the middleware component framework developed under the European project RUNES, we develop a number of control-oriented components necessary for the implementation of control applications and design their integration. The paper provides the overview of the approach, discusses a real life application where the approach has been tested and outlines a number of specific control problems that arise in this application.

}, keywords = {Embedded Control, Robotics}, author = {K -E Arz{\'e}n and A. Bicchi and G. Dini and S. Hailes and K. H. Johansson and J. Lygeros and A. Tzes} } @article {BHM07, title = {The Effect of Visual Experience on the Development of Functional Architecture in hMT+}, journal = {Cerebral Cortex}, volume = {17}, number = {12}, year = {2007}, note = {

[Epub ahead of print]

}, month = {March 19}, pages = {2933 - 2939}, publisher = {Oxford University Press}, abstract = {

We investigated whether the visual hMT+ cortex plays a role in supramodal representation of sensory flow, not mediated by visual mental imagery. We used functional magnetic resonance imaging to measure neural activity in sighted and congenitally blind individuals during passive perception of optic and tactile flows. Visual motion-responsive cortex, including hMT+, was identified in the lateral occipital and inferior temporal cortices of the sighted subjects by response to optic flow. Tactile flow perception in sighted subjects activated the more anterior part of these cortical regions but deactivated the more posterior part. By contrast, perception of tactile flow in blind subjects activated the full extent, including the more posterior part. These results demonstrate that activation of hMT+ and surrounding cortex by tactile flow is not mediated by visual mental imagery and that the functional organization of hMT+ can develop to subserve tactile flow perception in the absence of any visual experience. Moreover, visual experience leads to a segregation of the motion-responsive occipitotemporal cortex into an anterior subregion involved in the representation of both optic and tactile flows and a posterior subregion that processes optic flow only.

}, keywords = {Haptics}, author = {E. Ricciardi and N. Vanello and L. Sani and C. Gentili and E. P. Scilingo and L. Landini and M. Guazzelli and A. Bicchi and J. V. Haxby and P. Pietrini} } @inbook {HCVRSGSPPLB07, title = {Electrocutaneous stimulation of skin mechanoreceptors for tactile studies with functional Magnetic Resonance Imaging}, booktitle = {Encyclopedia of Healthcare Information Systems}, year = {2007}, pages = {497 - 503}, publisher = {Medical Information Science}, organization = {Medical Information Science}, keywords = {Haptics}, author = {V. Hartwig and C. Cappelli and N. Vanello and E. Ricciardi and E. P. Scilingo and G. Giovannetti and M. F. Santarelli and V. Positano and A. Bicchi and P. Pietrini and L. Landini} } @conference {VHTZSTRSBPDRL07, title = {An MRI Compatibility Study of a Fabric Sensing Glove for Sensory-Motor Brain Activity Exploration}, booktitle = {The 10th Annual International Workshop on Presence}, year = {2007}, pages = {79-83}, keywords = {Haptics}, author = {N. Vanello and V. Hartwig and M. Tesconi and G. Zupone and N. Sgambelluri and A. Tognetti and E. Ricciardi and E. P. Scilingo and A. Bicchi and P. Pietrini and D. De Rossi and L. Landini}, editor = {Laura Moreno, Starlab Barcelona, S.L.} } @article {SHH, title = {Robust sliding mode control of a robot manipulator based on variable structure-model reference adaptive control approach}, journal = {IET Control Theory Appl.}, volume = {1}, number = {5}, year = {2007}, month = {September 2007}, pages = {-1363}, abstract = {

A model reference adaptive-sliding mode control is presented and applied for a variable stiffness actuated (VSA) system. The VSA is a flexible stiffness machine with two coupled actuators in each link, and its safety during the movement can be guaranteed by varying both stiffness and the angular variables. Realisation of precise control of two coupled actuators poses a considerable challenge, however, because of uncertain time-varying parameters and unknown variation bounds. In this paper a neuro-sliding mode approach based on model reference adaptive control (MRAC) is proposed. The proposed MRAC control structure induces the VSA to follow its nominal dynamics with help of sliding mode control efforts. The sliding gain, implemented by a simple neural network (NN), is adaptively updated based on the Lyapunov criterion. A control law and adaptive laws for the sliding mode control as well as the weights in the NN are established so that the closed-loop system is stable in the sense of Lyapunov. The tracking errors of both the angular variables and stiffness are managed to guarantee the system to be asymptotically stable rather than uniformly ultimately bounded. And, the feasibility of the proposed control approach is demonstrated by means of experimental results as well as computer simulations.

}, keywords = {Physical Human-Robot Interaction (pHRI), Robotics}, author = {S. Huh and Z. Bien} } @conference {GVetal06, title = {Active Mechatronic Interface for Haptic Perception Studies with Functional Magnetic Resonance Imaging: Compatibility and Design Criteria}, booktitle = {Proc. IEEE Int. Conf. on Robotics and Automation}, year = {2006}, pages = {3832-3837}, abstract = {

Functional brain exploration methodologies such as functional magnetic resonance imaging (fMRI), are critical tools to study perceptual and cognitive processes. In order to develop complex and well controlled fMRI paradigms, researchers are interested in using active interfaces with electrically powered actuators and sensors. Due to the particularity of the MR environment, safety and compatibility criteria have to be strictly followed in order to avoid risks to the subject under test, to the operators or to the environment, as well as to avoid artifacts in the images. This paper describes the design of an fMRI compatible mechatronic interface based on MR compatibility tests of materials and actuators. In particular, a new statistical test looks at the mean and variations of activity as a time series. The device with two degrees of freedom, allowing one translation with positionfeedback along a horizontal axis and one rotation about a vertical axis linked to the translation, was realized to investigate the brain mechanisms of dynamic tactile perception tasks. It can be used to move and orient various objects below the finger for controlled tactile stimulation. The MR compatibility of the complete interface is shown using the same statistical test as well as a functional study with a human subject.

}, keywords = {Haptics}, author = {R. Gassert and N. Vanello and D. Chapuis and V. Hartwig and E. P. Scilingo and A. Bicchi and L. Landini and E. Burdet and H. Bleuler} } @conference {ricciardi05:_brain, title = {Brain response to visual, tactile and auditory flow in sighted and blind individuals supports a supramodal functional organization in hMT complex}, booktitle = {Proc. 12th International Conference on Functional Mapping of Human Brain Mapping}, volume = {31}, number = {1}, year = {2006}, note = {

Florence

}, pages = {512 TH-P}, publisher = {Elsevier}, organization = {Elsevier}, keywords = {Haptics}, author = {E. Ricciardi and L. Sani and C. Gentili and D. Bonino and N. Vanello and J. V. Haxby and E. Seifritz and M. Guazzelli and L. Landini and A. Bicchi and Di Salle, F and P. Pietrini} } @conference {HCV06, title = {A Compatible Electrocutaneous Display for functional Magnetic Resonance Imaging application}, booktitle = {Proc. 28th IEEE Engineering in Medicine and Biology Conference}, year = {2006}, note = {(poster presentation)}, pages = {100-102}, abstract = {In this paper we propose an MR (Magnetic Resonance) compatible electrocutaneous stimulator able to inject an electric current, variable in amplitude and frequency, into the fingertips in order to elicit tactile skin receptors (mechanoreceptors). The desired goal is to evoke specific tactile sensations selectively stimulating skin receptors by means of an electric current in place of mechanical stimuli. The field of application ranges from functional Magnetic Resonance Imaging (fMRI) tactile studies to augmented reality technology. The device here proposed is designed using safety criteria in order to comply with the threshold of voltage and current permitted by regulations. Moreover, MR safety and compatibility criteria were considered in order to perform experiments inside the MR scanner during an fMRI acquisition for functional brain activation analysis. Psychophysical laboratory tests are performed in order to define the different evoked tactile sensation. After verifying the device MR safety and compatibility on a phantom, a test on a human subject during fMRI acquisition is performed to visualize the brain areas activated by the simulated tactile sensation.}, keywords = {Haptics}, author = {V. Hartwig and C. Cappelli and N. Vanello and E. Ricciardi and E. P. Scilingo and G. Giovannetti and M. F. Santarelli and V. Positano and L. Landini and A. Bicchi} } @conference {CACSD06, title = {On the Design and Control of Wireless Networked Embedded Systems}, booktitle = {Int. Conf. on Computer Aided Control System Design - CACSD{\textquoteright}06}, year = {2006}, pages = {440-445}, publisher = {IEEE}, organization = {IEEE}, abstract = {

Wireless networked embedded systems are becoming increasingly important in a wide area of technical fields. In this tutorial paper we present recent results on design and control of these systems developed within the project Reconfigurable Ubiquitous Networked Embedded Systems (RUNES), which is an European Integrated Project with the aim to control complexity in networked embedded systems by developing robust and scalable middleware systems. New components for control under varying network conditions are discussed for the RUNES architecture. The complexity of the closed-loop system is increased due to the coupling with the disturbances introduced by the communication system. The network may introduce additional delays, jitter, data rate limitations, packet losses etc. Experimental work on integration test beds that demonstrates these results is shown together with motivating links to the RUNES disaster relief tunnel scenario.

}, keywords = {Embedded Control, Robotics}, author = {K -E Arz{\'e}n and A. Bicchi and S. Hailes and K. H. Johansson and J. Lygeros} } @conference {BBMSS06, title = {Hybrid Modelling and Control of the Common Rail Injection System}, booktitle = {Hybrid Systems: Computation and Control}, series = {Lecture Notes in Computer Science}, volume = {3927 / 2006}, year = {2006}, pages = {79-92}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, abstract = {

We present an industrial case study in automotive control of significant complexity: the new common rail fuel injection system for Diesel engines, currently under production by Magneti Marelli Powertrain. In this system, a flow-rate valve, introduced before the High Pressure (HP) pump, regulates the fuel flow that supplies the common rail according to the engine operating point. The standard approach followed in automotive control is to use a mean-value model for the plant and to develop a controller based on this model. In this particular case, this approach does not provide a satisfactory solution as the discrete-continuous interactions in the fuel injection system, due to the slow time-varying frequency of the HP pump cycles and the fast sampling frequency of sensing and actuation, play a fundamental role. We present a design approach based on a hybrid model of the Magneti Marelli Powertrain common-rail fuel-injection system for four-cylinder multi-jet engines and a hybrid approach to the design of a rail pressure controller. The hybrid controller is compared with a classical mean-value based approach to automotive control design whereby the quality of the hybrid solution is demonstrated.

}, keywords = {Embedded Control, Robotics}, author = {A. Balluchi and A. Bicchi and E. Mazzi and A. Sangiovanni Vincentelli and G. Serra}, editor = {J. Hespanha and A. Tiwari} } @conference {BMP06-HSCC, title = {Improving efficiency of finite plans by optimal choice of input sets}, booktitle = {Hybrid Systems: Computation and Control}, series = {Lecture Notes in Computer Science}, volume = {3927 / 2006}, year = {2006}, pages = {108-122}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, abstract = {

Finite plans proved to be an efficient method to steer complex control systems via feedback quantization. Such finite plans can be encoded by finite{\textendash}length words constructed on suitable alphabets, thus permitting transmission on limited capacity channels. In particular flat systems can be steered computing arbitrarily close approximations of a desired equilibrium in polynomial time. The paper investigates how the efficiency of planning is affected by the choice of inputs, and provides some results as to optimal performance in terms of accuracy and range. Efficiency is here measured in terms of computational complexity and description length (in number of bits) of finite plans.

}, keywords = {Embedded Control, Robotics}, author = {A. Bicchi and A. Marigo and B. Piccoli}, editor = {J. Hespanha and A. Tiwari} } @conference {PHRI06, title = {Safe and Dependable Physical Human-Robot Interaction in Anthropic Domains: State of the Art and Challenges}, booktitle = {Proc. IROS{\textquoteright}06 Workshop on pHRI - Physical Human-Robot Interaction in Anthropic Domains}, year = {2006}, publisher = {IEEE}, organization = {IEEE}, keywords = {Robotics}, author = {R. Alami and A Albu-Schaeffer and A. Bicchi and R. Bischoff and R. Chatila and A. De Luca and De Santis, A and G. Giralt and J. Guiochet and G. Hirzinger and F. Ingrand and V. Lippiello and R. Mattone and D. Powell and S. Sen and B. Siciliano and G. Tonietti and L. Villani}, editor = {A. Bicchi and A. De Luca} } @conference {IARP05, title = {Physical Human-Robot Interaction in Anthropic Domains: Safety and Dependability}, booktitle = {Proc. 4th IARP/IEEE-EURON Workshop on Technical Challenges for Dependable Robots in Human Environments}, year = {2005}, abstract = {

In this paper we describe the motivations and the aim ofthe EURON-2 research project {\textquoteleft}{\textquoteleft}\underline{P}hysical \underline{H}uman-\underline{R}obot \underline{I}nteraction in Anthropic \underline{Dom}ains{\textquoteright}{\textquoteright} (PRHIDOM). This project, which moves along the lines indicated by the 1$^{st}$ IARP/IEEE-RAS Workshop on Technical Challenge for Dependable Robots in Human Environments \cite{iarp01}, is about {\textquoteleft}{\textquoteleft}charting{\textquoteright}{\textquoteright} the new {\textquoteleft}{\textquoteleft}territory{\textquoteright}{\textquoteright} of physical Human-Robot Interaction (pHRI). To ensure these goals, the integration competences in control, robotics, design and realization of mechanical systems, human-machine interaction, and in safety-dependability of mechatronic systems is required. The PHRIDOM Consortium is composed of 5 partners from 3 different European countries.

}, keywords = {Robotics}, author = {A Albu-Schaeffer and A. Bicchi and G. Boccadamo and R. Chatila and A. De Luca and De Santis, A and G. Giralt and G. Hirzinger and V. Lippiello and R. Mattone and R. Schiavi and B. Siciliano and G. Tonietti and L. Villani} } @conference {ricciardi05:_supram_mt, title = {Supramodal response of human MT+ complex to visual and tactile perception of flow as demonstrated by fMRI studies in sighted and congenitally blind individuals}, booktitle = {11th annual meeting of the organization for Human Brain Mapping}, volume = {1}, year = {2005}, note = {

Toronto

}, pages = {129-129}, keywords = {Haptics}, author = {E. Ricciardi and L. Sani and C. Gentili and N. Vanello and J. V. Haxby and L. Landini and A. Bicchi and P. Pietrini} } @conference {DPSB04, title = {A compatibility test for tactile displays designed for fMRI studies.}, booktitle = {Proceedings of the EuroHaptics 2004 (Technische Universitat Munchen, Germany June 5-7, 2004)}, year = {2004}, pages = {456-458}, abstract = {

The purpose of this document is to provide a compatibility test for mechatronic devices to be used within a diagnostic MR environment. In order to design new devices that can produce tactile stimuli of different nature inside the MRI environment, compatibility tests with several materials and mechatronic devices are reported. Results of these experiments are analyzed in order to evaluate artefacts caused by the presence and actuation of the devices.

}, keywords = {Haptics}, author = {V. Hartwig and N. Vanello and R. Gassert and D. Chapuis and M. F. Santarelli and V. Positano and E. Ricciardi and P. Pietrini and L. Landini and A. Bicchi} } @conference {HBM04, title = {Perception of Optic and Tactile Flow Both Activate V5/MT cortical complex in the human brain}, booktitle = {10th Annual Meeting of the Organization for Human Brain Mapping}, year = {2004}, abstract = {

V5/MT complex responds selectively to perception of optic flow (Morrone et al., Nature Neurosci , 2001). Since similarities exist between visual and tactile perception, we hypothesized that tactile flow might also rely on V5/MT response. We and others have shown recently that visual extrastriate cortical areas respond both during visual and tactile recognition of objects, indicating that these regions are organized in a supramodal fashion. In this study, we measured neural response evoked during visual and tactile perception of coherently moving dot patterns to test the hypothesis that V5/MT may be supramodally organized and may respond also to tactile stimulation.

}, keywords = {Haptics}, author = {N. Vanello and E. Ricciardi and D. Dente and N. Sgambelluri and E. P. Scilingo and C. Gentili and L. Sani and V. Positano and M. F. Santarelli and M. Guazzelli and J. V. Haxby and L. Landini and A. Bicchi and P. Pietrini} } @conference {RVDSSGSPSGHLBP04, title = {Perception of visual and tactile flow activates common cortical areas in the human brain.}, booktitle = {Proceedings of the EuroHaptics 2004 (Technische Universitat Munchen, Germany June 5-7, 2004)}, year = {2004}, pages = {290-292}, abstract = {

We report results of a pilot study using functional magnetic resonance imaging aimed at determining the neural correlates of tactile flow. We hypothesized that brain response to tactile flow would involve the same cortical areas (V5/MT) that respond to optic flow. Our results showed that V5/MT cortex indeed is activated by tactile flow perception. These findings are consistent with a supramodal organization of brain regions involved in optic and tactile flow processing.

}, keywords = {Haptics}, author = {E. Ricciardi and N. Vanello and D. Dente and N. Sgambelluri and E. P. Scilingo and C. Gentili and L. Sani and V. Positano and M. F. Santarelli and M. Guazzelli and J. V. Haxby and L. Landini and A. Bicchi and P. Pietrini} } @unpublished {B02, title = {Machine hand design for dexterity, robustness of grasp, and interaction with humans}, year = {2001}, note = {

to appear (?) in Human and Machine Haptics

}, keywords = {Haptics, Robot Hands}, author = {A. Bicchi}, editor = {M. Cutkosky and R. Howe and J. K. Salisbury and M. Srinivasan} } @inbook {MB98, title = {Rolling bodies with regular surfaces: the holonomic case}, booktitle = {Differential geometry and control}, series = {Proceedings of Symposia in Pure Mathematics}, volume = {64}, year = {1999}, pages = {241-256}, publisher = {American Mathematical Society}, organization = {American Mathematical Society}, author = {A. Marigo and A. Bicchi}, editor = {G. Ferreyra and R. Gardner and H. Hermes and H. Sussmann} } @conference {B96, title = {Hands for Dextrous Manipulation and Powerful Grasping: a Difficult Road Towards Simplicity}, booktitle = {Robotics Research - VII}, year = {1996}, pages = {2-15}, publisher = {Springer Verlag}, organization = {Springer Verlag}, address = {Berlin Heidelberg, Germany}, keywords = {Grasping, Haptics, Robot Hands}, author = {A. Bicchi}, editor = {G. Giralt and G. Hirzinger} } @inbook {BSB93, title = {Experimental Evaluation of Friction Data with an Articulated Hand and Intrinsic Contact Sensors}, booktitle = {Experimental Robotics-III}, series = {LNCIS 190}, year = {1993}, publisher = {Springer Verlag}, organization = {Springer Verlag}, address = {Berlin Heidelberg, Germany}, keywords = {Haptics, Robotics}, author = {A. Bicchi and J. K. Salisbury and D. L. Brock}, editor = {R. Chatila and G. Hirzinger} }